www.massgsm.com/redhottips/

< HOMEPAGE

Front Bias Left Bias and Cross Weight Suspension Tuning with Weight Adjustments
By: Miroslav Ovcharik

Static Weight: Front Bias and Left Bias

The most fundamental way of changing the handling of your car is by redistributing the weight. The weight distribution of a car is determined by literally placing a scale under each wheel. When making weight distribution adjustments, you must consider the weight transitions that the car experiences while you are driving. For example, when you accelerate, weight shifts toward the back of the car onto the rear wheels. When you turn right, weight shifts to the left side of the car. You can feel these weight transfers on your body while you are driving.

The most useful weight adjustment for road racing is front bias, or the weight distribution between the front and rear wheels. The purpose of adjusting front bias is to balance the weight of the car evenly between the front and rear wheels while the car is turning. If the front tires have more weight on them while turning, then they will have to exert more force on the racetrack than the rear tires to keep from sliding. The same goes for the rear tires. This can be seen from basic physics:

F = ma = (m * v^2) / R
F = Force
m = mass
a = acceleration
v = velocity
R = radius

It can be determined that the acceleration of an object of mass ?m? traveling around a circle of radius ?R? with a velocity ?v? is v^2/R, and the force necessary to stay on the circular path with this velocity is just the object?s mass multiplied by that acceleration. Let?s assume that your car has more weight on the front tires than on the rear tires. Looking at the formula above, we can see that mass is the only thing that changes the force that the tires must exert since the square of velocity and radius are essentially identical for the front and rear of the car. Therefore, since the front has more mass, the front tires will have to provide more force than the rear tires to keep from sliding. Eventually, the front tires will begin to slip before the rear tires, which is the definition of understeer.

Making the weight on the front tires and the rear tires equal in a turn does not necessarily mean that the weight distribution should be 50/50 (50% front, 50% rear) while the car is standing still. The type of track you plan to drive on determines the ideal weight distribution. If the track requires getting on the throttle early in the turns, then weight will be transferred to the rear of the car while you are in the turn. Therefore, you should add weight to the front of the car to offset the weight transfer when you get on the throttle.

Instead of using a 50/50 distribution, you might want to try 55/45. The front of the car will be heavier than the rear when the car is standing still, but when you accelerate in a turn, weight will shift to the rear and balance the car. If you are driving on a track with short, sharp turns, then you will probably be getting on the throttle late in the turn. Therefore, you want a more even weight distribution to start out with (possibly 51/49) so that the weight will be evenly distributed as you drive through the turn.

Generally, if you are driving on a road coarse with approximately the same number of left and right turns, front bias should be the only weight adjustment that you work with. However, there are two other adjustments that can improve handling if you will be racing on an oval or a track with predominantly right or left turns: left weight bias and cross weight. Left bias is adding weight to the left side of the car so that it will be balanced in left turns. The same can be done for right turns.


Cross Weight

Cross weight (AKA wedge) is slightly more complicated. Front bias and left bias adjustments are made by actually moving components of the car around to try to achieve the desired weight distribution (e.g. moving the battery to the left side or rear of the car). Cross weight is adjusted by lowering or raising the upper spring perches on each corner of the car to raise or lower that corner.

To understand how cross weight works, imagine a car that is perfectly level with the ground (equal ride height at each corner). If you raise the left rear corner (increase cross weight), that corner now carries more weight because it is sticking up. In addition, the car is leaning towards the right front (trying to compress the right front spring) so that corner is holding more weight than it did when the car was level. The left rear and right front hold more of the weight of the car than the right rear and left front.

If you lower the left rear corner of the car, then the left front and right rear corners are sticking up more than the left rear. Therefore, the left front and right rear hold more of the weight while there is less weight on the left rear. Since the left rear corner is lowered, the car leans in that direction, which also takes weight off of the right front tire. In summary, by lowering the left rear (decreasing cross weight), the weight on the left front and right rear increases, and the weight on the right front and left rear decreases.

Cross weight is usually measured as a percentage of the total weight of the car. Take the following weight distribution as an example:

Left front: 750 lbs., Right front: 700 lbs.
Left rear: 700 lbs., Right rear: 750 lbs.

The cross weight is simply the left rear/right front (diagonal) weight divided by the total weight of the car and multiplied by 100 to make it a percentage. In this case, the cross weight is:

[(2 * 700) / (2 * 700 + 2 * 750)] * 100 = 48.3 %

Cross weight will not change left bias or front bias weight distribution. Using the example above, you can see that front bias is 50% ((750+700)/(750+700)), and left bias is also 50%. Assume you decrease cross weight to 46.6 % with the following settings (while keeping total weight the same as before):

Left front: 775 lbs., Right front: 675 lbs.
Left rear: 675 lbs., Right rear: 775 lbs.

The front bias and left bias are both still 50%.

Decreasing cross weight adds oversteer to the car in left turns. The front tires grip better since the left front starts out with more weight than the right front. In the turn, weight transfers from the left front to the right front, which balances the front of the car and maximizes grip. On the other hand, the rear of the car is not balanced in a turn. The right rear holds much more weight than the left rear. Therefore, the rear tires do not grip as well as the front tires, which creates oversteer. With the same kind of reasoning, you can see why increasing cross weight creates understeer.

Cross weight is usually difficult and time consuming to adjust on a street car even if you have installed aftermarket suspension components such as coilovers. Unless you are building a pure race car for oval tracks, you don?t have to worry about cross weight adjustments. Remember that the weight distribution of your car, particularly front bias, is the most fundamental characteristic that affects how your car handles. Keep in mind that the weight of the driver affects weight bias. Placing parts on the right side of the car will help balance the weight of the driver on the left side.

For more information on weighing a car and making weight adjustments, visit http://www.grmotorsports.com/news/012005/understanding-corner-weights.php.

Visit my website for more information about suspension setups:
http://www.240edge.com

NAVIGATION

Fuel Tips For The Car
Consumer Update The 2007 Shelby Mustang Cobra
Simple Tips To Save Gas
Gas Costs Need Not Break Your Bank
Hybrid Cars Save Money
Some Important Things To Remember When You Buy Used Cars
A Car Donation in Boston the Easy Way
Land Rovers Resilient But Absent Defender
BMWs Hydrogen Fuel Quest
Save on Gas Sensibly and Sanely
The Characteristics of Antique Cars
Controversial Rolls Royce Plant Delayed
Motor Sports Goes Online
Porsche 911 Performs Best Over Others
Car Navigation Sytem Your New Driving Personal Assistant
Dodge SRT8 Charger Not Just Another Family Sedan
Tricking Out Your Dodge Ram SRT10
Mercedes Blue New Diesels Miss the Mark
Chryslers Rip Roaring SRT Family of Vehicles
Be Safe Dodge the Most Common RV Claims
RV Windshield Damage Repair Options
Save Fuel Save Money
How To Get Your Cars Engine To Temperature
The Importance of Car Information
Switch Grass As A Possible Alternative Fuel
Custom Wheels And Rims Sizes Colors And Specifications
The Budget way to Modifying your Car
Several Car Web Sites
Scooter Buying Tips Finding A Light Weight Scooter
Cheap Car Insurance Online
I Finally Found a Polaris Youth ATV
Golf Cart Seat Covers
Golf Cart Rims
Car Alarm Systems Come Under Fire
Car Alarm Reviews
Choosing the Right Horse Trailer
Tuning Adjustable Shock Absorbers
Finding the Optimum Gear Ratios for your Car
The Brand New Lexus ES 350
Optimizing the Aerodynamic Balance of your Car
Using Brake Bias Adjustment to Improve CornerEntry Handling
Choosing an Appropriate Body Kit for your Car and Applicatio ...
Using GPS Tracking to Protect Your Vehicles
Keep Your Investment Safe With Vehicle Tracking
Vehicle Tracking System
Suspension Alignment Understanding and Adjusting Caster
Suspension Alignment Understanding and Adjusting Toe
Choosing the Right Aftermarket Springs for your Car
Selecting and Adjusting Aftermarket AntiRoll Bars
Used Car Buyers Get Relief from California Bill of Rights
Nissan Micra CC Pink Is Back
Front Bias Left Bias and Cross Weight Suspension Tuning with ...
Suspension Alignment Understanding and Adjusting Camber
Selecting Tires for RaceStreet Use and Adjusting Tire Pressu ...
Boat Trailers For Sale Finding a Good Deal
Boat Trailers A Must Have For Boat Owners
Coming Soon To A Garage Near You The Hybrid Car
Repairing or Replacing Your Automotive Headliner
Auto Transport Tips For Transporting Your Vehicle
Understanding Handling Characteristics in Relation to Race S ...
Semi Truck Accessories 5 Trick My Truck Tips For Truckers
Cars Gas Mileage Estimation
Explaining The World Of Gas Scooters
The Oil Change Sticker A Low Cost And Effective Sales Tool
Automobile Financing Know Your Options
Antique Classics Cars That Last
Different Tonneau Covers For Different Trucks
Types Of Scooters Know The Importance Of Electric Scooters
Repairing Scooters Ways To Keep Your Scooter Alive
Boat Propellers First Time Prop Replacement
Tips to Search for an Auto Insurance Policy
Automobile Financing Know Your Options
Auto Auction
Leasing a Car the Smart Way
Classic Car Insurance Discover The Essential Facts
Car Safety
Fitting Auto Body Kits
Biodiesel And Its Many Uses
Using Byproducts to Fuel Hydrogen Cars
All About Hybrid Cars
Orgs And Services For Vintage Buick And Chevrolet Enthusiast ...
Getting The Right Skid Plates
Auto Insurance The Internet A Marriage Made In Heaven
Repair Shops Ordering Tires For Your Car
Handguard Installation Made easy
Tonneau Covers Protection For Your Truck
Buying Car
Car Insurance What Is Liability And Collision Insurance
Naming A Car After A Boat Chevrolet Corvette
Expansion Of Auto Industry In Russia